NEBULA SECTIONAL DRAWINGS GENERAL DESCRIPTION Non-load bearing fully demountable glass partitioning system - low profile tracking with toughened glass.  From finished floor to ceiling. BRITISH STANDARDS Glass manufactured to BS6206: 1981 Impact Performance. Installation to BS6262 Code of practice for glazing for buildings. Section 5.3.2.4 & 5.3.2.5 Aluminium manufactured to BS1474: 1987 Architectural grade 6063T6.  Powder coated to BS6496.  Gaskets manufactured to ISO9002.
	Contact us for full technical specification › FRAME WORK   25mm x 25mm extruded aluminium powder coated in a range of standard colours.  Special RAL & BS colours also available on application. GLAZING Linear & curved panels: 10mm toughened up to a height of 2400mm maximum width 1500mm. 12mm toughened up to a height of 3200mm maximum width 1200mm. 15mm toughened up to a height of 4200mm maximum width 1000mm. All glass panels are supplied and installed to manufacturers tolerances.  Acoustic laminates also available.
	PANEL JOINTS We believe that nebulan is the most attractive joint available today.  We're convinced you will too. Using the many advantages of nebula will mean no more protruding 'H' joints or silicon, just a smooth, sleek and translucent finish every time. Our joint fits 10, 12 and 15mm toughened glass to meet all of your design needs.  The nebula is 5mm in diameter while the joint gap is 1.5mm.  Horizontal joints are gasket glazed to allow ease of installation and demountability.  Vertical joints are gasket glazed using nebulan No glue or silicone means full demountability.  90 degree corners and T- junctions use a combination of nebula and  tape.  Tolerance of joint is a constant 1.5mm nebula and 2mm tape.
	DOORS 10 & 12mm full height. Max 3200mm x 900. Doors with over panels and sliding also available. DOOR FURNITURE Standard range of satin stainless steel or polished stainless steel available from stock.  Other ranges available on application.

MANIFESTATION

To approved document M location.  1500 from FFL row of dots, solid band or a pattern of your choice or design.  Glazed doors without frames require large handles or push plates on each single panel.

Glasstac - Window Films & Graphics is our preferred partner for all your manifestation needs.

• Partition Graphics
• Manifestations
• Window Graphics
• Privacy/Solar/Anti-Glare Films
• Safety/Emergency Repair Films

Visit the Glasstac website at www.glasstac.co.uk

Contact us for full technical specification ›

ENVIRONMENTAL POLICY

Infinity Glass has always regarded protection of the environment as an important issue and are committed to ensuring that in manufacturing our partitions we do not cause unnecessary environmental harm.

The paints and lacquers used by Infinity Glass are lead free and are applied using the latest technology.

Our partitioning systems are almost 100% recyclable and re-locatable and can be reinstalled again and again.  All the steel and aluminium components can be re-claimed as scrap metal at the end of the product life.

As an alternative to expensive glass etching Infinity Glass can provide translucent manifestation, which is not only cheaper, but far more environmentally friendly to produce.

NEBULA SECTIONAL DRAWINGS